ARTA PCB V4.1 plus R

ARTA PCB V4.1

Original ARTA-Box PCB for building your own ARTA-Box

Inclusive 27 Ohm / 15W High Power Resistor with less than 0,05% Tolerance!

ARTABox is used for performing professional loudspeaker measurements.
For more information please visit

http://www.artalabs.hr/

Here you can download the faceplate labels: ARTABox41_Label
And (as ususal) here you can find the Schematic and the Partlist with Reichelt part numbers: ARTA41_Partlist

In case you don’t want to build and solder the PCB yourself, you can also choose the ready made ARTA 4.1 Modul or a complete Kit.

We also offer the sometimes hard to find rocker switches here!

Note: the PCB offers two alternatives for the soundcard input protection.
Typically this is done using the Z-Diodes and Jumpers. If those are used you don't need to install the ESD Diodes and their Resistors.